Using the Avro File Format with Impala Tables

To create a new table using the Avro file format, issue the CREATE TABLE statement through Impala with the STORED AS AVRO clause, or through Hive. If you create the table through Impala, you must include column definitions that match the fields specified in the Avro schema. With Hive, you can omit the columns and just specify the Avro schema.

In Impala 2.3 and higher, the CREATE TABLE for Avro tables can include SQL-style column definitions rather than specifying Avro notation through the TBLPROPERTIES clause. Impala issues warning messages if there are any mismatches between the types specified in the SQL column definitions and the underlying types; for example, any TINYINT or SMALLINT columns are treated as INT in the underlying Avro files, and therefore are displayed as INT in any DESCRIBE or SHOW CREATE TABLE output.

The following examples demonstrate creating an Avro table in Impala, using either an inline column specification or one taken from a JSON file stored in HDFS:

[localhost:21000] > CREATE TABLE avro_only_sql_columns
                  > (
                  >   id INT,
                  >   bool_col BOOLEAN,
                  >   tinyint_col TINYINT, /* Gets promoted to INT */
                  >   smallint_col SMALLINT, /* Gets promoted to INT */
                  >   int_col INT,
                  >   bigint_col BIGINT,
                  >   float_col FLOAT,
                  >   double_col DOUBLE,
                  >   date_string_col STRING,
                  >   string_col STRING
                  > )
                  > STORED AS AVRO;

[localhost:21000] > CREATE TABLE impala_avro_table
                  > (bool_col BOOLEAN, int_col INT, long_col BIGINT, float_col FLOAT, double_col DOUBLE, string_col STRING, nullable_int INT)
                  > STORED AS AVRO
                  > TBLPROPERTIES ('avro.schema.literal'='{
                  >    "name": "my_record",
                  >    "type": "record",
                  >    "fields": [
                  >       {"name":"bool_col", "type":"boolean"},
                  >       {"name":"int_col", "type":"int"},
                  >       {"name":"long_col", "type":"long"},
                  >       {"name":"float_col", "type":"float"},
                  >       {"name":"double_col", "type":"double"},
                  >       {"name":"string_col", "type":"string"},
                  >       {"name": "nullable_int", "type": ["null", "int"]}]}');

[localhost:21000] > CREATE TABLE avro_examples_of_all_types (
                  >     id INT,
                  >     bool_col BOOLEAN,
                  >     tinyint_col TINYINT,
                  >     smallint_col SMALLINT,
                  >     int_col INT,
                  >     bigint_col BIGINT,
                  >     float_col FLOAT,
                  >     double_col DOUBLE,
                  >     date_string_col STRING,
                  >     string_col STRING
                  >   )
                  >   STORED AS AVRO
                  >   TBLPROPERTIES ('avro.schema.url'='hdfs://localhost:8020/avro_schemas/alltypes.json');

The following example demonstrates creating an Avro table in Hive:

hive> CREATE TABLE hive_avro_table
    > ROW FORMAT SERDE 'org.apache.hadoop.hive.serde2.avro.AvroSerDe'
    > STORED AS INPUTFORMAT 'org.apache.hadoop.hive.ql.io.avro.AvroContainerInputFormat'
    > OUTPUTFORMAT 'org.apache.hadoop.hive.ql.io.avro.AvroContainerOutputFormat'
    > TBLPROPERTIES ('avro.schema.literal'='{
    >    "name": "my_record",
    >    "type": "record",
    >    "fields": [
    >       {"name":"bool_col", "type":"boolean"},
    >       {"name":"int_col", "type":"int"},
    >       {"name":"long_col", "type":"long"},
    >       {"name":"float_col", "type":"float"},
    >       {"name":"double_col", "type":"double"},
    >       {"name":"string_col", "type":"string"},
    >       {"name": "nullable_int", "type": ["null", "int"]}]}');

Each field of the record becomes a column of the table. Note that any other information, such as the record name, is ignored.

Most column types map directly from Avro to Impala under the same names. These are the exceptions and special cases to consider:

• The DECIMAL type is defined in Avro as a BYTE type with the logicalType property set to "decimal" and a specified precision and scale.
• The Avro long type maps to BIGINT in Impala.

If you create the table through Hive, switch back to impala-shell and issue an INVALIDATE METADATA table_name statement. Then you can run queries for that table through impala-shell.

Complex type considerations: Although you can create tables in this file format using the complex types (ARRAY, STRUCT, and MAP) available in Impala 2.3 and higher, currently, Impala can query these types only in Parquet tables. The one exception to the preceding rule is COUNT(*) queries on RCFile tables that include complex types. Such queries are allowed in Impala 2.6 and higher.

If you create an Avro table in Hive, issue an INVALIDATE METADATA the next time you connect to Impala through impala-shell. This is a one-time operation to make Impala aware of the new table. You can issue the statement while connected to any Impala node, and the catalog service broadcasts the change to all other Impala nodes.

If you load new data into an Avro table through Hive, either through a Hive LOAD DATA or INSERT statement, or by manually copying or moving files into the data directory for the table, issue a REFRESH table_name statement the next time you connect to Impala through impala-shell. You can issue the statement while connected to any Impala node, and the catalog service broadcasts the change to all other Impala nodes. If you issue the LOAD DATA statement through Impala, you do not need a REFRESH afterward.

Impala only supports fields of type boolean, int, long, float, double, and string, or unions of these types with null; for example, ["string", "null"]. Unions with null essentially create a nullable type.

While you can embed a schema directly in your CREATE TABLE statement, as shown above, column width restrictions in the Hive metastore limit the length of schema you can specify. If you encounter problems with long schema literals, try storing your schema as a JSON file in HDFS instead. Specify your schema in HDFS using table properties similar to the following:

tblproperties ('avro.schema.url'='hdfs//your-name-node:port/path/to/schema.json');

Currently, Impala cannot write Avro data files. Therefore, an Avro table cannot be used as the destination of an Impala INSERT statement or CREATE TABLE AS SELECT.

To copy data from another table, issue any INSERT statements through Hive. For information about loading data into Avro tables through Hive, see Avro page on the Hive wiki.

If you already have data files in Avro format, you can also issue LOAD DATA in either Impala or Hive. Impala can move existing Avro data files into an Avro table, it just cannot create new Avro data files.

To enable compression for Avro tables, specify settings in the Hive shell to enable compression and to specify a codec, then issue a CREATE TABLE statement as in the preceding examples. Impala supports the snappy and deflate codecs for Avro tables.

For example:

hive> set hive.exec.compress.output=true;
hive> set avro.output.codec=snappy;

Starting in Impala 1.1, Impala can deal with Avro data files that employ schema evolution, where different data files within the same table use slightly different type definitions. (You would perform the schema evolution operation by issuing an ALTER TABLE statement in the Hive shell.) The old and new types for any changed columns must be compatible, for example a column might start as an int and later change to a bigint or float.

As with any other tables where the definitions are changed or data is added outside of the current impalad node, ensure that Impala loads the latest metadata for the table if the Avro schema is modified through Hive. Issue a REFRESH table_name or INVALIDATE METADATA table_name statement. REFRESH reloads the metadata immediately, INVALIDATE METADATA reloads the metadata the next time the table is accessed.

When Avro data files or columns are not consulted during a query, Impala does not check for consistency. Thus, if you issue SELECT c1, c2 FROM t1, Impala does not return any error if the column c3 changed in an incompatible way. If a query retrieves data from some partitions but not others, Impala does not check the data files for the unused partitions.

In the Hive DDL statements, you can specify an avro.schema.literal table property (if the schema definition is short) or an avro.schema.url property (if the schema definition is long, or to allow convenient editing for the definition).

For example, running the following SQL code in the Hive shell creates a table using the Avro file format and puts some sample data into it:

CREATE TABLE avro_table (a string, b string)
ROW FORMAT SERDE 'org.apache.hadoop.hive.serde2.avro.AvroSerDe'
STORED AS INPUTFORMAT 'org.apache.hadoop.hive.ql.io.avro.AvroContainerInputFormat'
OUTPUTFORMAT 'org.apache.hadoop.hive.ql.io.avro.AvroContainerOutputFormat'
TBLPROPERTIES (
  'avro.schema.literal'='{
    "type": "record",
    "name": "my_record",
    "fields": [
      {"name": "a", "type": "int"},
      {"name": "b", "type": "string"}
    ]}');

INSERT OVERWRITE TABLE avro_table SELECT 1, "avro" FROM functional.alltypes LIMIT 1;

Once the Avro table is created and contains data, you can query it through the impala-shell command:

[localhost:21000] > select * from avro_table;
+---+------+
| a | b    |
+---+------+
| 1 | avro |
+---+------+

Now in the Hive shell, you change the type of a column and add a new column with a default value:

-- Promote column "a" from INT to FLOAT (no need to update Avro schema)
ALTER TABLE avro_table CHANGE A A FLOAT;

-- Add column "c" with default
ALTER TABLE avro_table ADD COLUMNS (c int);
ALTER TABLE avro_table SET TBLPROPERTIES (
  'avro.schema.literal'='{
    "type": "record",
    "name": "my_record",
    "fields": [
      {"name": "a", "type": "int"},
      {"name": "b", "type": "string"},
      {"name": "c", "type": "int", "default": 10}
    ]}');

Once again in impala-shell, you can query the Avro table based on its latest schema definition. Because the table metadata was changed outside of Impala, you issue a REFRESH statement first so that Impala has up-to-date metadata for the table.

[localhost:21000] > refresh avro_table;
[localhost:21000] > select * from avro_table;
+---+------+----+
| a | b    | c  |
+---+------+----+
| 1 | avro | 10 |
+---+------+----+

The Avro format defines a set of data types whose names differ from the names of the corresponding Impala data types. If you are preparing Avro files using other Hadoop components such as Pig or MapReduce, you might need to work with the type names defined by Avro. The following figure lists the Avro-defined types and the equivalent types in Impala.

Primitive Types (Avro -> Impala)
--------------------------------
STRING -> STRING
STRING -> CHAR
STRING -> VARCHAR
INT -> INT
BOOLEAN -> BOOLEAN
LONG ->  BIGINT
FLOAT ->  FLOAT
DOUBLE -> DOUBLE

Logical Types
-------------
BYTES + logicalType = "decimal" -> DECIMAL

Avro Types with No Impala Equivalent
------------------------------------
RECORD, MAP, ARRAY, UNION,  ENUM, FIXED, NULL

Impala Types with No Avro Equivalent
------------------------------------
TIMESTAMP

The Avro specification allows string values up to 2**64 bytes in length. Impala queries for Avro tables use 32-bit integers to hold string lengths. In Impala 2.5 and higher, Impala truncates CHAR and VARCHAR values in Avro tables to (2**31)-1 bytes. If a query encounters a STRING value longer than (2**31)-1 bytes in an Avro table, the query fails. In earlier releases, encountering such long values in an Avro table could cause a crash.

In general, expect query performance with Avro tables to be faster than with tables using text data, but slower than with Parquet tables. See Using the Parquet File Format with Impala Tables for information about using the Parquet file format for high-performance analytic queries.

In Impala 2.6 and higher, Impala queries are optimized for files stored in Amazon S3. For Impala tables that use the file formats Parquet, RCFile, SequenceFile, Avro, and uncompressed text, the setting fs.s3a.block.size in the core-site.xml configuration file determines how Impala divides the I/O work of reading the data files. This configuration setting is specified in bytes. By default, this value is 33554432 (32 MB), meaning that Impala parallelizes S3 read operations on the files as if they were made up of 32 MB blocks. For example, if your S3 queries primarily access Parquet files written by MapReduce or Hive, increase fs.s3a.block.size to 134217728 (128 MB) to match the row group size of those files. If most S3 queries involve Parquet files written by Impala, increase fs.s3a.block.size to 268435456 (256 MB) to match the row group size produced by Impala.